“One sees differently with color photography than black
and white...in short, visualization must be modified by
the specific nature of the equipment and materials being
used.”
–Ansel Adams
The original color image. (left) The adjusted black and
white conversion. (center) The final color toned black and white image. (right)
Seeing in black and white
Black and white conversions are radical transformations
of images. They’re about reestablishing the tonal founda-
tions of an image. That’s quite different than dodging
and burning, or lightening and darkening locally, which is a
matter of accentuating existing tonal relationships.
The Channels palette shows the red, green, and blue
components of a color image. Each channel offers a useful black and white
interpretation
of the color image that you can use to adjust the color.
The key concept is for you to use the color channels as black and white layers.
Adobe Photoshop CS2
Product used
Black and White Conversion
Conversion methods
There are almost a dozen ways to convert an image from
color to black and white; and you can probably find
at least one expert to support each way as the best
conversion method. The bottom line is that most conversion
methods work reasonably well. The method that works best
for you depends on your particular workflow and
the tools that you’re comfortable with. The following
method isn’t necessarily the best and it isn’t the fastest—it
generates a larger file—but it offers you the most
control and flexibility.
Creating layers from channels offers you more control
than any other conversion method. It also offers you the
flexibility of being able to change any aspect of the
conversion at any time in the future. Here’s how you do it: copy
the individual channels of a color image, and then paste
them into the same document as the original color image.
Next, rename the layers accordingly. Then, reduce the
opacity of the layers to achieve the result that you want. If
you want a neutral image and don’t want the color of the
Background layer to show through, keep the opacity of
the layer directly above the color Background layer at
100%.
Since you will be going back and forth between the
Channels palette and the Layers palette during this exercise, it
helps to separate these two palettes by dragging them
apart, and putting them side by side, as shown here.
The Layers palette is on the left. The Background layer
contains the original color image. The palette on the right shows you the first
step
in creating a layer from a channel: activate the Red
channel. On the Select menu, choose All, and then copy the selected channel. It
is
important that you re-select the RGB composite (the top
image in the Channels palette), before going to the next step.
Choose Edit > Paste. The Red grayscale channel becomes
a new layer.
Rename the layer as the color of the channel to keep the
layers organized.
Repeat the process with the Green and Blue channels.
Before selecting and copying the next channel, it’s important to turn off the
visibility
of the new layers that you’ve created above the
Background. Otherwise you will not be copying the true color channel data from
the
Background layer.
All three channels are pasted as layers above the color
Background layer.
If you begin this method with an RGB file, you’ll have
three new layers: Red, Green, and Blue. You can also
explore adding a fourth channel/layer: the L channel. If
you duplicate an RGB file, and then convert the duplicate
to Lab (by choosing Image > Mode > Lab), you can
copy the L (or Luminosity) channel from the duplicate file, and
then paste the L channel back into its original RGB source
as a layer. The L channel has a different tonal structure
that you may find useful.
After duplicating your color image and converting the
duplicate to Lab, select the Lightness channel, and then make a copy of it.
When
converting to Lab, choose Don’t Flatten, and again, be
sure all new B&W layers above the Background are turned off before copying
it.
In the Layer palette of your original color image, paste
this channel as a new layer. It’s useful to add the Lightness layer below the
base layer
of the conversion (as the image above shows).
At the bottom of the Layers palette, click Add Layer
Mask. Repeat this step for each of the layers above the Background layer.
When you work with layer masks, you advance your
techniques to the next level. When you add a mask to each
layer and then paint on it (generally at a low opacity),
you vary the conversion in specific areas of an image. If you
choose to create this variance, you should keep the
opacity of the layer at the highest setting needed for any one
area within the image and reduce the opacity in other
areas by adding density to the mask. Think of the layer’s
opacity as a global change in opacity, and think of the
density of the mask as a local change in opacity.
You can change the opacity of both the layer and the
density of the mask at any time—now or in the future. This
is one reason why this method is not only precise, but
it’s also incredibly flexible. It’s why I stopped shooting black
and white film a long time ago. You simply have more
control by using this method.
In the image above, the Red layer’s mask is selected and
the area of the Red layer is adjusted by painting black on the mask. Be sure
you
target the actual layer mask and not the pixel layer
before painting. You can correct mistakes in the masking by reversing your
foreground
and background color, and then painting white back into
the mask. (Adding white does not correct the mistake made if you incorrectly
paint
on the pixel layer.) By trial and error, you can
fine-tune each layer. Note: In the image above, the Blue and Green layers have
been turned
off; otherwise the Red layer would be obscured by those
layers.
The image above has had fine-tuning applied on all of the
layer masks. All of the layers are turned on, as the images of the Layers and
Channels palettes show.
While there are effects to watch for, such as shadows
that are too dark or highlights that are too light, these will
vary from image to image. Each image requires a different
mix, and each individual mixes the channels differently
depending on their objectives and personal taste—and even
those may change over time.
You can tune each layer’s overall opacity to adjust for
light and dark parts of an image. Tuning gives you an extremely precise
capability to
use when you convert images to black and white.
After you’ve worked with black and white conversions for
a bit, you’ll begin to develop an eye for how the tonal
structure of a given scene or image can be established in
a variety of ways. You’ll find that some subjects, such as
those that contain a variety of saturated colors, offer
the widest range of possibilities.
When preparing to make a portrait, Arnold Newman tells
his subjects, “Wear a nice shirt—something without
stripes. Black or white would be best.”
I’ve taken a cue from Newman, and I tell my subjects,
“Wear a nice shirt—something without stripes. And
preferably something in a bright saturated color-ideally
red, green, or blue.” That way, I can later make the shirt
black, white, or any shade of gray in between.
The final conversion also includes a hue and saturation
adjustment layer at the top of the list of layers. If you click Colorize (as
shown in the
preceding image), select a brown hue, and then select a
gentle saturation, you can produce nicely-toned black and white images
reminiscent
to chemically-toned silver gelatin prints.
10
Find more tools, tips, and resources for Adobe software
in the Adobe Design Center at www.adobe.com/designcenter
Adobe, the Adobe logo,and Photoshop are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States
and/or other countries. All other trademarks are
the property of their respective owners.
© 2006 John Paul Caponigro. All rights reserved. .
Resources
I outline this method in my book, Adobe® Photoshop®
Master Class, and I cover black and white conversions and
printing black and white images in detail in my workshop,
The Fine Digital Print. This workshop uses Epson Ultra-
Chrome Inks with both Atkinson’s profiles and ColorByte’s
ImagePrint RIP to achieve excellent neutrality and gray
balance. Many black and white image photographers are
interested to see the output on Epson’s new R2400 and
4800/7800/9800 professional printers that produce an
excellent neutral ink-jet print.
Action
You can download an Action file that automates the
process here: www.adobe.com/digitalimag/ps_pro_primers.html.
Double-click this file to load it into your Action palette.
Open an RGB file, and then click the Play button. When the
action finishes playing, the black and white conversion
will be automatically set up for you. This action leaves you
with a file that has a 100% luminosity layer conversion.
You can raise the opacity of the layers above this layer to
change the mix, but be sure to keep the opacity of the
luminosity layer at 100%. If you don’t keep this opacity, some
color from the Background layer will show through, which
can create an interesting effect, but I recommend you
do it another way. You could also reduce the opacity of
the layer set.
GET STARTED NOW!
Call ADVANCE GRAPHICS at 8950076650 to speak to one of
our Marketing Specialists.Or email us at mintusudan@gmail.com
No comments:
Post a Comment